BL107落地式C型油壓機
- 品牌：博菱
- 型號：BL107-30T
BL107系列
|
型 號 Model |
單 位 Unit |
BL107-10T |
BL107-30T |
BL107-50T |
BL107-100T |
|
|
公 稱 壓 力 Nominal force Out put |
KN |
100 |
300 |
500 |
1000 |
|
|
液體最大工作壓力 Maximum hydraulic working pressure |
MPa |
20 |
20 |
20 |
20 |
|
|
回 程 力 Back storke force |
KN |
7.8 |
3 |
3.9 |
4.2 |
|
|
機架臺面距地面高度 Height of tale above floor |
mm |
780 |
780 |
780 |
780 |
|
|
最 大 開 口 距 離 Biggest operational height |
mm |
400 |
400 |
400 |
400 |
|
|
壓 塊 最 大 行 程 Maximum stroke of the ram |
mm |
300 |
300 |
300 |
300 |
|
|
工作臺有效面積 Dimensions of table |
左 右 Left-right |
mm |
500 |
500 |
600 |
600 |
|
前 后 Front-back |
mm |
400 |
400 |
400 |
400 |
|
|
滑塊壓頭速度 Speed of slide |
下行速度 Speed of Down |
mm/s |
≥76 |
≥142 |
≥150 |
≥150 |
|
工作速度 Work of speed |
mm/s |
≥76 |
≥16 |
≥15 |
≥12 |
|
|
回程速度 Speed of etuming |
mm |
≥76 |
≥100 |
≥105 |
≥105 |
|
|
壓 塊主幾輪廓 長X寬X高 Overal dimensions of the machine |
KW |
650X720X1850 |
650X720X1900 |
650X720X1950 |
650X720X1950 |
|
|
總 功 率 Motor Power |
KW |
2.2 |
3.75 |
3.75 |
5.5 |
|
107系列落地油壓機
107 Floor-type Hydraulic press
特點 Feature
-
采用整體焊接的堅固式結構可使機身保持足夠鋼性的同時擁有最方便的操作空間；
-
壓力、行程、保壓時間、閉合高度均可按需求無級調整，也可設計為兩段速度（空載快速，加壓慢速），并可在使用行程內任意調整快速和工進的長短；
-
另可選增加測力傳感器及顯示器，精確顯示產品受力狀況，達到所需工作目的；
-
也可另選增加電子尺或光柵尺及顯示器，精確顯示油缸位移狀況，達到所需工作目的；
-
The well constructed, yet practically designed ergonomic frame, provides stability and ease of use;
-
Pressing force, cutting stroke and die height, can all be manually adjusted to the operators comfort level;
-
A pressing pressure display is available for this model;
-
An electronic ruler coupled with emergency shut-off buttons and a motion activated safety cut-off light ensure a very safe Hydraulic solution.
適用范圍 Scope of Application:
本系列油壓機適用于金屬或非金屬零件的壓印、成型、淺拉深、整形及壓力裝配等；電機轉子、眼鏡、鎖模及五金零件的壓制等；
Embossing forming, shallow draw, shaping and pressure assembling of metal or non-metal parts, press fitting of motor rotors and stators, electronic connectors and electric parts, pressing of glasses, locked modes and hardware parts, etc.
